Slanetrac HC150 Hedge Cutter
Machine mounted wide cutting
40mm cutting thickness
The Slanetrac HC150 Hedge Cutter for mini diggers suits a wide range of machines.
With a 1.5m width and designed to be low maintenance. Helped by having individually replaceable teeth.
The Slanetrac HC range connects to the hydraulic breaker lines of your machine for fast effortless installation.
With a cutting thickness of up to 40mm.
The Slanetrac HC series mini digger finger bar hedge cutter offers clean cuts, leaving neat and tidy hedges.
Not only that but this then provides more satisfactory conditions for re-growth.
As well as ensuring minimum disturbance to wildlife compared to flail cutting attachments.
The hydraulically powered reciprocating finger bar allows for fast and neat cutting of hedges.
For best results when heavy cutting of thick growth is required.
The operator can use the slewing motion of the machine for finer lighter hedges and growth.
The operator can use the tracking movement to get the desired finish, helping to save time and increase productivity.
Designed to allow cutting to take place between horizontal and vertical via the adjustable mounting bracket.
This then allows the operator better access to those hard to reach places.
Behind fences and over hedges, it also allows the operator to navigate obstacles like telephone poles and fence posts.
All this gives you greater versatility over the flail options that are out there.
|Machine Carrier||0.8T - 1.9T|
|Oil Flow||20L - 30L /Min|