Specialists in Plant Hire & Sales for Concrete Drilling, Sawing and Controlled Demolition
 
Call us on 01252 524141

Hand Held Diamond Drill (Product Code 12111)

Our hand-held diamond drills can be used to form smaller diameter holes, through brickwork, blockwork and reinforced concrete, in applications where noise and vibration are an issue.

Diamond drilling is non-percussive and therefore there is very little vibration and the noise levels are kept to a minimum.

The hole that is formed is clean cut and neat, meaning there is no “making good” afterwards.

Whilst diamond drilling, the cutting tip of the drill is flushed with water – this cools the tool and the work and controls dust.

Standard drill cores for hand-held drilling are available from 6mm to 127mm diameter.

Standard length of cores is 450mm, but deeper holes can be drilled by the addition of extension bars, for larger diameter holes.

Specification

Code
Code: (12111)
Voltage
110v
Weight (without Core)
5.4kg
Max hole diameter
127mm
Wet / Dry
Either with correct core drill
Inverted drilling
No
Rig Mounted
Can be - see Small Rigs
Output Shaft fixing
1 1/4" UNC & 1/2" BSP
Dust / Water control available
Yes - Call for details
Code
Code: (12111)
Voltage
110v
Weight (without Core)
5.4kg
Max hole diameter
127mm
Wet / Dry
Either with correct core drill
Inverted drilling
No
Rig Mounted
Can be - see Small Rigs
Output Shaft fixing
1 1/4" UNC & 1/2" BSP
Dust / Water control available
Yes - Call for details
X
Your form was successfully submitted.