Hilti DD350 Diamond Drill Set Up
Drill up to 500mm diameter
Lightweight Rig
From £325 Per Week
You need a trade account to see our hire rates.
Alternatively, please contact us to check rates for this product.
The Hilti DD350
Complete coring system is a great 110v option for larger core drilling, up to 500mm (when used with stand off plate).
This is a lightweight rig and motor assembly, which is supplied with full holding down anchors and available with a range of core sizes.
There are LED power control indicators to enable the user to achieve optimum performance and extend core bit life.
This rig uses high frequency technology to deliver maximum power across a broad range of core sizes.
This machine is not fully waterproof, but is rated up to IP55, meaning is it resistant to water spray, for drilling in extreme conditions.
Machine must be drained of water fully when exposed to sub-zero conditions – see operators manual for full details.
Code | 12125 |
---|---|
Power Required | 110v / 32A |
Core Range | 52mm to 500mm |
Gears / Speeds | 10 |
Min / Max Speed (RPM) | 298 / 667 |
Weight (Motor) | 14.4kg |
Weight (Rig) | 20.6kg |
Ingress Protection Level | IP55 |
Drive Type | 1 1/4" UNC |
No Load RPM | gear 1: 298 rpm; gear 2: 667 rpm; gear 4: 571 rpm; gear 5: 524 rpm; gear 6: 464 rpm; gear 7: 369 rpm; gear 8: 321 rpm; gear 9: 238 rpm |
A PDF viewer will be required to open these files |
---|
Hilti DD350 Operators Manual |