Fixed 2-Way Hydraulic Excavator Selector Grab
0.8-3 Tonne Excavator Fixed Hydraulic Selector Grab
From £85 Per Week
You need a trade account to see our hire rates.
Alternatively, please contact us to check rates for this product.
This is a non-rotating grab and runs simply off the excavators double acting hydraulic hammer circuit. Unlike rotating grabs it does not require a second hydraulic service which helps reduce the comparative cost.
A quick hitch cross link is supplied as standard (if pin measurements allow) and enables the grab can be used in either orientation. Should the excavator pin measurements not provide sufficient clearance for a cross link headstock to be manufactured, a standard one way hitch will be provided – this can still easily be turned 90 degrees on a set of only 4 bolts in under 2 minutes.
Check out our diggers available
Carrier Weight (KG) | 800-3000KG |
Height Closed | 460mm |
Height Open | 390mm |
Max Opening | 770mm |
Width | 350mm |
No Of Cylinders | 1 |
Hydraulic Hose Ports | 1/4" |
Weight | 85Kg |